vs-10ets..fppbf series, vs-10ets..fp-m3 series www.vishay.com vishay semiconductors revision: 18-jun-13 1 document number: 94335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 high voltage, input rectifier diode, 10 a features ? very low forward voltage drop ? 150 c max. operating junction temperature ? designed and qualified according to jedec-jesd47 ? fully isolated package (v ins = 2500 v rms ) ? ul e78996 approved ? material categorization: ? for definitions of co mpliance please see www.vishay.com/doc?99912 applications ? input rectification ? vishay semiconductors switch es and output rectifiers which are available in identical package outlines description high voltage rectifiers opti mized for very low forward voltage drop with moderate leakage. these devices are intended for use in main rectification (single or three phase bridge). ? product summary package to-220fp i f(av) 10 a v r 800 v to 1200 v v f at i f 1.1 v i fsm 160 a t j max. 150 c diode variation single die anode 1 3 cathode base cathode to-220 full-pak available output current in typical applications applications single-phase bridge three-phase bridge units capacitive input filter t a = 55 c, t j = 125 c ? common heatsink of 1 c/w 12.0 16.0 a major ratings and characteristics symbol characteristics values units i f(av) sinusoidal wa v eform 10 a v rrm range 800/1200 v i fsm 160 a v f 10 a, t j = 25 c 1.1 v t j - 40 to 150 c voltage ratings part number v rrm , maximum peak reverse voltage v v rsm , maximum non-repetitive peak reverse voltage v i rrm at 150 c ma vs-10ets08fpp b f, vs-10ets08fp-m3 800 900 0.5 vs-10ets12fpp b f, vs-10ets12fp-m3 1200 1300
vs-10ets..fppbf series, vs-10ets..fp-m3 series www.vishay.com vishay semiconductors revision: 18-jun-13 2 document number: 94335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 absolute maximum ratings parameter symbol test conditions values units maximum a v erage forward current i f(av) t c = 105 c, 180 conduction half sine wave 10 a maximum peak one cycle ? non-repetiti v e surge current i fsm 10 ms sine pulse, rated v rrm applied 135 10 ms sine pulse, no v oltage reapplied 160 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 91 a 2 s 10 ms sine pulse, no v oltage reapplied 130 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no v oltage reapplied 1300 a 2 ? s electrical specifications parameter symbol test conditions values units maximum forward v oltage drop v fm 10 a, t j = 25 c 1.1 v forward slope resistance r t t j = 150 c 20 m ? threshold v oltage v f(to) 0.82 v maximum re v erse leakage current i rm t j = 25 c v r = rated v rrm 0.05 ma t j = 150 c 0.50 thermal - mechanical specifications parameter symbol test conditions values units maximum junction and storage ? temperature range t j , t stg - 40 to 150 c maximum thermal resistance, ? junction to case r thjc dc operation 2.5 c/w maximum thermal resistance, ? junction to am b ient r thja 62 typical thermal resistance, ? case to heatsink r thcs mounting surface, smooth and greased 0.5 approximate weight 2g 0.07 oz. mounting torque minimum 6 (5) kgf cm (l b f in) maximum 12 (10) marking de v ice case style to-220 full-pak (94/v0) 10ets08fp 10ets12fp
vs-10ets..fppbf series, vs-10ets..fp-m3 series www.vishay.com vishay semiconductors revision: 18-jun-13 3 document number: 94335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 1 - current rating characteristics fig. 2 - current rating characteristics fig. 3 - forward power loss characteristics fig. 4 - forward power loss characteristics fig. 5 - maximum non-re petitive surge current fig. 6 - maximum non-re petitive surge current 8 0 100 90 150 140 130 120 110 maximum allowable case temperature (c) average forward current (a) 246 8 10 12 0 30 60 90 1 8 0 v s-10ets.. series r thjc (dc) = 2.5 c/ w cond u ction angle ? 120 90 130 140 120 110 100 150 maximum allowable case temperature (c) average forward current (a) 4 26 8 16 1 8 10 12 14 0 dc 30 60 1 8 0 v s-10ets.. series r thjc (dc) = 2.5 c/ w ? cond u ction period 90 120 0 16 14 12 10 8 6 4 2 maximum average forward power loss (w) average forward current (a) 246 10 8 0 rms limit v s-10ets.. series t j = 150 c cond u ction angle ? 1 8 0 120 90 60 30 0 8 6 4 2 20 1 8 16 14 12 10 246 8 16 12 10 14 0 rms limit v s-10ets.. series t j = 150 c ? cond u ction period dc 1 8 0 120 90 60 30 maximum average forward power loss (w) average forward current (a) peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 1 10 100 30 40 50 60 70 80 90 100 110 120 130 140 150 v s -10et s .. s s erie s at any rated load condition and with rated vrrm applied following s urge. initial tj = 150c at 60 hz 0.0083 s at 50 hz 0.0100 s 0.01 0.1 1 10 10 30 50 70 90 110 130 150 170 maximum non-repetitive s urge current ver s u s pul s e train duration. initial tj = tj max. no voltage reapplied rated vrrm reapplied v s -10et s .. s s erie s peak half sine wave forward current (a) pulse train duration (s)
vs-10ets..fppbf series, vs-10ets..fp-m3 series www.vishay.com vishay semiconductors revision: 18-jun-13 4 document number: 94335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - forward voltage drop characteristics fig. 8 - thermal impedance z thjc characteristics 1 10 100 instantaneous forward current (a) instantaneous forward voltage (v) 0.5 1.0 1.5 2.0 2.5 3.0 0 v s-10ets.. series t j = 25 c t j = 150 c 0.1 1 10 0.0001 0.001 0.01 0.1 1 square wave pulse duration (s) z thjc - transient thermal impedance (c/w) 10 d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.0 8 steady state val u e (dc operation) v s-10ets.. series single p u lse
vs-10ets..fppbf series, vs-10ets..fp-m3 series www.vishay.com vishay semiconductors revision: 18-jun-13 5 document number: 94335 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ordering information table ordering information (example) preferred p/n quantity per t/r minimum order quantity packaging description vs-10ets08fppbf 50 1000 anti static plastic tubes vs-10ets08fp-m3 50 1000 anti static plastic tubes vs-10ets12fppbf 50 1000 anti static plastic tubes vs-10ets12fp-m3 50 1000 anti static plastic tubes 1 - current rating (10 = 10 a) 2 - circuit configuration: 3 - package: 4 - type of silicon: 5 - voltage rating 6 - 7 8 e = single diode t = to-220 s = standard recovery rectifier 08 = 800 v 12 = 1200 v full-pak device code - 6 2 4 3 5 7 8 10 e t s 12 fp pbf vs- 1 - vishay semiconductors product environmental digit: pbf = lead (pb)-free and rohs compliant -m3 = halogen-free, rohs compliant and terminations lead (pb)-free links to related documents dimensions www.vishay.com/doc?95005 part marking information to-220fp pbf www.vishay.com/doc?95009 to-220fp -m3 www.vishay.com/doc?95440
outline dimensions www.vishay.com vishay semiconductors revision: 20-jul-11 1 document number: 95005 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 dimensions in millimeters 5 0.5 3.3 3.1 5 0.5 0.9 0.7 2.54 typ. 2.54 typ. 10.6 10.4 3.7 3.2 7.31 6.91 0.61 0.38 2.85 2.65 2.8 2.6 1.4 1.3 10 4.8 4.6 16.0 15.8 16.4 15.4 (2 places) r 0.7 r 0.5 hole ? 3.4 3.1 typ. 1.15 1.05 13.56 13.05 lead assignments diode s 1 + 2 - cathode 3 - anode conforms to jedec outline to-220 full-pak
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
